Component Carrier:Downlink:Test Model Property
- Updated2024-04-10
- 1 minute(s) read
Component Carrier:Downlink:Test Model Property
Short Name: DL Test Model
Property of RFmxLTE
Specifies the E-UTRA test model type when you set the DL Ch Configuration Mode property to Test Model. Refer to section 6.1.1 of the 3GPP 36.141 specification for more information regarding test model configurations.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure or read this property.
The default value is TM1.1.
| TM1.1 (0) |
Specifies an E-UTRA Test Model 1.1. |
| TM1.2 (1) |
Specifies an E-UTRA Test Model 1.2. |
| TM2 (2) |
Specifies an E-UTRA Test Model 2. |
| TM2a (3) |
Specifies an E-UTRA Test Model 2a. |
| TM2b (8) |
Specifies an E-UTRA Test Model 2b. |
| TM3.1 (4) |
Specifies an E-UTRA Test Model 3.1. |
| TM3.1a (7) |
Specifies an E-UTRA Test Model 3.1a. |
| TM3.1b (9) |
Specifies an E-UTRA Test Model 3.1b. |
| TM3.2 (5) |
Specifies an E-UTRA Test Model 3.2. |
| TM3.3 (6) |
Specifies an E-UTRA Test Model 3.3. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxLTE Configure Downlink Test Model, RFmxLTE Configure Downlink Test Model (Array) |
| Resettable | Yes |