Component Carrier:Bandwidth (Hz) Property
- Updated2024-04-10
- 1 minute(s) read
Component Carrier:Bandwidth (Hz) Property
Short Name: CC Bandwidth (Hz)
Property of RFmxLTE
Specifies the channel bandwidth of the signal being measured. This value is expressed in Hz.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure or read this property.
The default value is 10 MHz.
| 200.0 k (2e5) |
Indicates a channel bandwidth of 200 kHz. This value indicates that the received signal is an NB-IoT stand-alone signal. |
| 1.4 M (1.4e6) |
Indicates a channel bandwidth of 1.4 MHz. |
| 3.0 M (3e6) |
Indicates a channel bandwidth of 3 MHz. |
| 5.0 M (5e6) |
Indicates a channel bandwidth of 5 MHz. |
| 10.0 M (10e6) |
Indicates a channel bandwidth of 10 MHz. |
| 15.0 M (15e6) |
Indicates a channel bandwidth of 15 MHz. |
| 20.0 M (20e6) |
Indicates a channel bandwidth of 20 MHz. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxLTE Configure Component Carrier, RFmxLTE Configure Component Carrier (Array) |
| Resettable | Yes |