RFmxLteMXComponentCarrier.SetDownlinkNumberOfSubframes Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierSetDownlinkNumberOfSubframes Method
Sets the number of unique subframes transmitted by the DUT. If you set the SetDownlinkChannelConfigurationMode(String, RFmxLteMXDownlinkChannelConfigurationMode) method to TestModel, this method will be set to 10 for FDD and 20 for TDD by default.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int SetDownlinkNumberOfSubframes( string selectorString, int value )
Public Function SetDownlinkNumberOfSubframes ( selectorString As String, value As Integer ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string. - value
- Type: SystemInt32
Specifies the number of unique subframes transmitted by the DUT. If you set the SetDownlinkChannelConfigurationMode(String, RFmxLteMXDownlinkChannelConfigurationMode) method to TestModel, this method will be set to 10 for FDD and 20 for TDD by default.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.
Remarks
This method sets the value of DownlinkNumberOfSubframes attribute. The default value is 10. Valid values are 10 and 20.