RFmxLteMXAcpResults.FetchAbsolutePowersTrace Method

public int FetchAbsolutePowersTrace(
	string selectorString,
	double timeout,
	int traceIndex,
	ref Spectrum<float> absolutePowersTrace
)

Public Function FetchAbsolutePowersTrace ( 
	selectorString As String,
	timeout As Double,
	traceIndex As Integer,
	ByRef absolutePowersTrace As Spectrum(Of Single)
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used. Example:
""
"result::r1"
You can use the BuildResultString(String) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

traceIndex

Type: SystemInt32
Specifies the index of the trace to fetch. The traceIndex can range from 0 to (Number of carriers + 2*Number of offsets).

absolutePowersTrace

Type: NationalInstrumentsSpectrumSingle
Returns the trace of the measured integrated power in the channel specified by the traceIndex parameter. The carrier power is reported in dBm when you set the RFmxLteMXAcpPowerUnits method to dBm, and in dBm/Hz when you set the RFmxLteMXAcpPowerUnits method to dBm/Hz.

Return Value

Reference