RFmxLTE_ACPCfgAveraging
- Updated2024-10-14
- 2 minute(s) read
RFmxLTE_ACPCfgAveraging
int32 __stdcall RFmxLTE_ACPCfgAveraging (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 averagingEnabled, int32 averagingCount, int32 averagingType);
Purpose
Configures averaging for the ACP measurement.
Parameters
| Input | ||||||||||||
| Name | Type | Description | ||||||||||
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize function. | ||||||||||
| selectorString | char[] | Specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. Example: "signal::sig1" You can use the RFmxLTE_BuildSignalString function to build the selector string. |
||||||||||
| averagingEnabled | int32 | Specifies whether to enable averaging for the measurement.
|
||||||||||
| averagingCount | int32 | Specifies the number of acquisitions used for averaging when you set the averagingEnabled parameter to RFMXLTE_VAL_ACP_AVERAGING_ENABLED_TRUE. |
||||||||||
| averagingType | int32 | Specifies the averaging type for averaging multiple spectrum acquisitions. The averaged spectrum is used for the measurement.
|
||||||||||
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError function. The general meaning of the status code is as follows:
|
||||||||