Advanced:Frequency Settling Units Property
- Updated2024-04-10
- 1 minute(s) read
Advanced:Frequency Settling Units Property
Short Name: Freq Settling Units
Property of RFmxInstr
Specifies the delay duration units and interpretation for LO settling.
Specify the actual settling value using the Frequency Settling property.
|
Note The Frequency Settling Units property is not supported if you are using an external LO. |
You do not need to use a selector string if you want to configure this property for all signal instances. Specify the signal name in the selector string if you want to configure or read that signal instance. Refer to the Selector Strings topic for information about the string syntax.
The default value is PPM.
Supported devices: PXIe-5644/5645/5646, PXIe-5663/5663E/5665/5668, PXIe-5830/5831/5832/5840/5841/5842
| PPM (0) |
Specifies the frequency settling in parts per million (ppm). |
| Seconds After Lock (1) |
Specifies the frequency settling in time after lock (seconds). |
| Seconds After I/O (2) |
Specifies the frequency settling in time after I/O (seconds). |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |