LO:LO In Power (dBm) Property

LO:LO In Power (dBm) Property

Short Name: LO In Power (dBm)

Property of RFmxInstr

Specifies the power level expected at the LO IN terminal when the LO Source property is set to LO_In. This value is expressed in dBm.

For PXIe-5830/5831/5832, if you want to configure or read on LO1 or LO2 channel, use "lo1" or "lo2" as part of the selector string. You do not need to use a selector string or use "lo1, lo2" as part of the selector string if you want to configure this property for both channels. You can also use RFmxInstr Build LO String utility function to create the LO String. For all other devices, lo channel string is not allowed.

Note  This property is not supported on a MIMO session.

You do not need to use a selector string if you want to configure this property for all signal instances. Specify the signal name in the selector string if you want to configure or read on that signal instance. Refer to the Selector string topic for information about the string syntax.

Note  For PXIe-5644/5645/5646, this property is always read-only.

The default value is 0.

Supported devices: PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842

Remarks

The following table lists the characteristics of this property.

Datatype
Permissions	Read/Write
High-level VIs	N/A
Resettable	Yes