RFmxGsmMXModAccResults Methods

RFmxGsmMXModAccResults Methods

The RFmxGsmMXModAccResults type exposes the following members.

Methods

	Name	Description
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object)
	FetchConstellationTrace	Fetches the constellation trace concatenated over all slots for the last acquistion.
	FetchDemodulatedBits	Fetches the array of demodulated bits concatenated over all slots for the last acquisition.
	FetchDetectedTsc	Fetches the detected training sequence code (TSC) of the last burst for GSM/EDGE/EGPRS. Use "slot(n)" as the selector string to read results from this method.
	FetchDetectedTscArray	Fetches the detected training sequence code (TSC) of the last acquisition for GSM/EDGE/EGPRS.
	FetchEvm	Fetches the EVM measurement results for EDGE/EGPRS.
	FetchEvmAmplitudeDroop	Fetches the amplitude droop measurement results for EDGE/EGPRS.
	FetchEvmMagnitudeError	Fetches the RMS values of the magnitude error measurement results for EDGE/EGPRS.
	FetchEvmPhaseError	Fetches the phase error measurement results for EDGE/EGPRS.
	FetchEvmTrace	Fetches the EDGE/EGPRS RMS EVM trace concatenated over all slots for the last acquisition.
	FetchIQImpairments	Fetches the origin offset and gain imbalance measurement results for GSM/EDGE/EGPRS.
	FetchMagnitudeErrorTrace	Fetches the EDGE/EGPRS magnitude error trace concatenated over all slots for the last acquisition.
	FetchPfer	Fetches the phase and frequency error measurement results for GSM.
	FetchPhaseErrorTrace	Fetches the phase error trace concatenated over all slots for the last acquisition.
	GetDetectedTsc	Gets the detected training sequence code (TSC) if you set the SetBurstSynchronizationType(String, RFmxGsmMXBurstSynchronizationType) method to Tsc. Use "slot(n)" as the selector string to read this result.
	GetEvm95thPercentileEvm	Gets the EVM value at which no more than 5% of the symbols have an EVM exceeding this value. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvm95thPercentileMagnitudeError	Returns the measured magnitude error value multiplied by 100, at which, no more than 5 percent of the symbols have magnitude error exceeding this value. This result is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured as a percentage.
	GetEvm95thPercentilePhaseError	Gets the measured phase error value multiplied by 100, at which, no more than 5 percent of the symbols have phase error exceeding this value. This result is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured in degrees.
	GetEvmMaximumAmplitudeDroop	Gets the maximum of the amplitude droop values measured over all acquisition time slots. This value is expressed in dB/symbol. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMaximumFrequencyError	Gets the maximum of the frequency error values measured over all acquisition time slots. This value is expressed in Hz. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMaximumMagnitudeError	Gets the maximum of the RMS values of magnitude error measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMaximumPeakEvm	Gets the maximum of the peak EVM values measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMaximumPeakMagnitudeError	Gets the maximum of peak magnitude error measured over all timeslots of all acquisitions. This method is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured as a percentage.
	GetEvmMaximumPeakPhaseError	Gets the maximum of peak phase error measured over all timeslots of all acquisitions. This result is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured in degrees.
	GetEvmMaximumPhaseError	Gets the maximum of the RMS values of phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMaximumRmsEvm	Gets the maximum of the RMS EVM values measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanAmplitudeDroop	Gets the mean of the amplitude droop values measured over all acquisition time slots. This value is expressed in dB/symbol. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanFrequencyError	Gets the mean of the frequency error values measured over all acquisition time slots. This value is expressed in Hz. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanMagnitudeError	Gets the mean of the RMS values of magnitude error measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanPeakEvm	Gets the mean of the peak EVM values measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanPeakMagnitudeError	Returns the mean of peak magnitude error measured over all timeslots of all acquisitions. This method is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured as a percentage.
	GetEvmMeanPeakPhaseError	Gets the mean of peak phase error measured over all timeslots of all acquisitions. This result is returned while performing ModAcc measurement on EDGE/EGPRS. This value is measured in degrees.
	GetEvmMeanPhaseError	Gets the mean of the RMS values of phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for EDGE/EGPRS measurements.
	GetEvmMeanRmsEvm	Gets the mean of the RMS EVM values measured over all acquisition time slots. This value is expressed as a percentage. The method returns this result for EDGE/EGPRS measurements.
	GetEvmPeakEvmSymbol	Gets the symbol number in the burst measurement interval that corresponds to the EVM value returned by the GetEvmMaximumPeakEvm(String, Double) result. The method returns this result for EDGE/EGPRS measurements.
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object)
	GetMaximumIQGainImbalance	Gets the maximum of I/Q gain imbalance values measured over all acquisition time slots. This value is expressed in dB. The presence of quadrature skew in the signal affects the measurement of I/Q gain imbalance.
	GetMaximumIQOriginOffset	Gets the maximum of the I/Q origin offset values measured over all acquisition time slots. This value is expressed in dB. Presence of I/Q gain imbalance in the signal affects the I/Q origin offset measurement. The method returns this result for GSM/EDGE/EGPRS measurements.
	GetMeanIQGainImbalance	Gets the mean of I/Q gain imbalance values measured over all acquisition time slots. This value is expressed in dB. The presence of quadrature skew in the signal affects the measurement of I/Q gain imbalance.
	GetMeanIQOriginOffset	Gets the mean of the I/Q origin offset values measured over all acquisition time slots. This value is expressed in dB. Presence of I/Q gain imbalance in the signal affects the I/Q origin offset measurement. The method returns this result for GSM/EDGE/EGPRS measurements.
	GetPfer95thPercentilePhaseError	Gets the measured phase error value multiplied by 100, at which, no more than 5 percent of the symbols have phase error exceeding this value. This result is returned while performing ModAcc measurement on GSM. This value is measured in degrees.
	GetPferMaximumFrequencyError	Gets the maximum of the frequency error values measured over all acquisition time slots. This value is expressed in Hz. The method returns this result for GSM ModAcc measurements.
	GetPferMaximumPeakPhaseError	Gets the maximum of peak phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for GSM ModAcc measurements.
	GetPferMaximumRmsPhaseError	Gets the maximum of the RMS phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for GSM ModAcc measurements.
	GetPferMeanFrequencyError	Gets the mean of the frequency error values measured over all acquisition time slots. This value is expressed in Hz. The method returns this result for GSM ModAcc measurements.
	GetPferMeanPeakPhaseError	Gets the mean of peak phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for GSM ModAcc measurements.
	GetPferMeanRmsPhaseError	Gets the mean of the RMS phase error values measured over all acquisition time slots. This value is expressed in degrees. The method returns this result for GSM ModAcc measurements.
	GetPferPeakPhaseErrorSymbol	Gets the symbol number in the useful portion of the burst corresponding to the phase error value in the GetPferMaximumPeakPhaseError(String, Double) result. The method returns this result for GSM ModAcc measurements.
	GetType	Gets the Type of the current instance. (Inherited from Object)
	ToString	Returns a string that represents the current object. (Inherited from Object)

Top

See Also