The adjacent channel power (ACP) measurement covers three standard defined test cases: ACP, EDR In-Band Emission, and LE In-Band Emission.

You can set appropriate Packet Type property values to execute the three test cases. The following table illustrates the Packet Type property values, their corresponding test cases, and test specifications using the ACP measurement.

Packet Type Value Test Case Test Specification
DH1/DH3/DH5/DM1/DM3/DM5 ACP RF/TRM/CA/BV-06-C of the Bluetooth Test Specification RF.TS.p33
2-DH1/2-DH3/2-DH5/3-DH1/3-DH3/3-DH5/2-EV3/2-EV5/3-EV3/3-EV5 EDR In-Band Emission RF/TRM/CA/BV-13-C of the Bluetooth Test Specification RF.TS.p33
LE LE In-Band Emission RFPHY/TRM/BV-03-C and RFPHY/TRM/BV-08-C of the Bluetooth Test Specification RFPHY.TS.p23
The RFmx results applicable for ACP, EDR In-Band Emission, and LE In-Band Emission test cases are as follows:
  • ACP Results Meas Status
  • ACP Results Reference Channel Pwr (dBm)
  • ACP Results Lower Offset Abs Pwr (dBm)
  • ACP Results Lower Offset Rel Pwr (dB)
  • ACP Results Lower Offset Margin (dB)
  • ACP Results Upper Offset Abs Pwr (dBm)
  • ACP Results Upper Offset Rel Pwr (dB)
  • ACP Results Upper Offset Margin (dB)