PowerRamp:Burst Synchronization Type Property
- Updated2024-04-10
- 1 minute(s) read
PowerRamp:Burst Synchronization Type Property
Short Name: PowerRamp Burst Sync Type
Property of RFmxBT
Specifies the type of synchronization used for detecting the start of packet in the PowerRamp measurement.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Preamble.
| None (0) |
Specifies that the measurement does not perform synchronization to detect the start of the packet. |
| Preamble (1) |
Specifies that the measurement uses the preamble field bits to detect the start of the packet. |
| Sync Word (2) |
Specifies that the measurement uses the Access Address for LE-CS packets to detect the start of the packet. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |