Packet:Channel Sounding:SYNC Sequence Property
- Updated2024-04-10
- 1 minute(s) read
Packet:Channel Sounding:SYNC Sequence Property
Short Name: CS SYNC Sequence
Property of RFmxBT
Specifies the type of sequence present in the SYNC portion after trailer bits. This property is applicable only when you set the Packet Type property to LE-CS and the CS Packet Format property to any value other than CS Tone.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is None.
| None (0) |
Specifies that there is no optional sequence at the end of the SYNC portion of the LE-CS packet. |
| Sounding Sequence 32-bit (1) |
Specifies that there is a 32-bit sounding sequence at the end of the SYNC portion of the LE-CS packet. |
| Sounding Sequence 96-bit (2) |
Specifies that there is a 96-bit sounding sequence at the end of the SYNC portion of the LE-CS packet. |
| Payload Pattern (3) |
Specifies that the payload bit pattern is present at the end of the SYNC portion of the LE-CS packet. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |