Packet:Direction Finding:Mode Property
- Updated2024-04-10
- 1 minute(s) read
Packet:Direction Finding:Mode Property
Short Name: Direction Finding Mode
Property of RFmxBT
Specifies the mode of direction finding.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Disabled.
| Disabled (0) |
Specifies that the LE packet does not have fields required for direction finding. |
| Angle of Arrival (1) |
Specifies that the LE packets uses the Angle of Arrival method of direction finding. |
| Angle of Departure (2) |
Specifies that the LE packets uses the Angle of Departure method of direction finding. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |