NationalInstruments.BluetoothDtm Namespace
- Updated2023-02-21
- 3 minute(s) read
Classes
| Class | Description | |
|---|---|---|
 | BluetoothDtmException |
Initializes a new instance of the BluetoothDtmException class with a specified error message.
|
| NIBluetoothDtm | Defines a root class which is used to identify and control BluetoothDtm signal configuration. |
Enumerations
| Enumeration | Description | |
|---|---|---|
 | BluetoothDtmDirectionFindingMode |
Specifies the mode of direction finding. The default value is Disabled.
|
| BluetoothDtmFlowControl |
Specifies the flow control method used for transmitting and receiving data. The default value is RtsCts
|
| BluetoothDtmLEPatternType |
Specifies the type of payload to use for the LE packet. Payload type values of Type_Prbs9, Type_11110000, and Type_10101010 must be supported by the DUT. The remaining payload type values are optional. The default value is Type_Prbs9.
|
| BluetoothDtmModulationIndex |
Specifies the type of modulation index at the generator. The default value is Standard.
|
| BluetoothDtmParity |
Specifies the parity bit used with each transmitted or received frame. The default value is None.
|
| BluetoothDtmReceiverPhy |
Specifies the type of the generated packet by the physical layer of the DUT. The default value is Phy_1Mbps. |
| BluetoothDtmStopBits |
specifies the number of stop bits used to indicate the end of a frame. The default value is StopBits1_0.
|
| BluetoothDtmTransmitterPhy |
Specifies the type of the packet to be transmitted by the physical layer of the DUT. The default value is Phy_1Mbps.
|