RFmxEvdoMXModAccResults.FetchUplinkEvm Method

public int FetchUplinkEvm(
	string selectorString,
	double timeout,
	out double uplinkRmsEvm,
	out double uplinkPeakEvm,
	out double uplinkRho,
	out double frequencyError,
	out double chipRateError,
	out double uplinkRmsMagnitudeError,
	out double uplinkRmsPhaseError
)

Public Function FetchUplinkEvm ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef uplinkRmsEvm As Double,
	<OutAttribute> ByRef uplinkPeakEvm As Double,
	<OutAttribute> ByRef uplinkRho As Double,
	<OutAttribute> ByRef frequencyError As Double,
	<OutAttribute> ByRef chipRateError As Double,
	<OutAttribute> ByRef uplinkRmsMagnitudeError As Double,
	<OutAttribute> ByRef uplinkRmsPhaseError As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

uplinkRmsEvm

Type: SystemDouble
Upon return, contains the RMS of the EVM, as a percentage.

uplinkPeakEvm

Type: SystemDouble
Upon return, contains the peak value of the uplink EVM, as a percentage.

uplinkRho

Type: SystemDouble
Upon return, contains the Rho value.

frequencyError

Type: SystemDouble
Upon return, contains the detected frequency error in Hz.

chipRateError

Type: SystemDouble
Upon return, contains the chip rate error in parts per million (ppm).

uplinkRmsMagnitudeError

Type: SystemDouble
Upon return, contains the RMS of the magnitude error, as a percentage.

uplinkRmsPhaseError

Type: SystemDouble
Upon return, contains the RMS of the phase error in degrees.

Return Value

Reference