RFmxEvdoMXCdaResults Methods

Determines whether the specified Object is equal to the current Object.

Fetches the measured I/Q impairments.

Fetches the I and Q mean active powers and the I and Q peak inactive powers.

Fetches the I and Q code power traces measured in the code domain of the base spreading factor.

Fetches the scalar code domain power results.

Fetches the symbol constellation trace of the configured measurement channel.

Fetches the modulation accuracy related measures for the configured measurement channel.

Returns the symbol EVM trace of the configured measurement channel.

Returns the symbol magnitude error trace of the configured measurement channel.

Fetches the symbol phase error trace of the configured measurement channel.

Returns the symbol power trace of the configured measurement channel.

Gets the chip rate error. This value is expressed in ppm.

Gets the frequency error. This value is expressed in Hz.

Serves as a hash function for a particular type.

Gets the I/Q gain imbalance. This value is expressed in dB.

Gets the I/Q origin offset. This value is expressed in dB.

Gets the I/Q quadrature error. This value is expressed in degrees.

Gets the Type of the current instance.

Gets the average power of all active code channels measured on the I-branch. If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the largest measured code power among the set of inactive channels on the I-branch, and in the code domain of the base spreading factor. The base spreading factor depends on the configured physical layer subtype, and is 16 for subtype 0/1; 32 otherwise.If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the average power of all active code channels. If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the mean power of the Reverse Auxiliary Pilot Channel (R-APICH). This value is expressed in dB or dBm.

Gets the average code power measured among the set of inactive channels in the code domain of the base spreading factor. The base spreading factor depends on the configured physical layer subtype and is 16 for subtype 0/1; 32 otherwise.If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the mean power of the Reverse Pilot channel (R-PICH). This value is expressed in dB or dBm.

Gets the mean symbol power of the configured measurement channel. This value is expressed in dB or dBm.

Gets the maximum power among all the active code channels. If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the largest measured code power among the set of inactive channels in the code domain of the base spreading factor. The base spreading factor depends on the configured physical layer subtype, and is 16 for subtype 0/1; 32 otherwise.If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the peak symbol EVM of the configured measurement channel. This value is expressed as a percentage.

Gets the average power of all active code channels measured on the Q-branch. If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the largest measured code power among the set of inactive channels on the Q-branch, and in the code domain of the base spreading factor. This value is expressed in dB or dBm.The base spreading factor depends on the configured physical layer subtype, and is 16 for subtype 0/1, and 32 otherwise.

Gets the RMS symbol EVM of the configured measurement channel. This value is expressed as a percentage.

Gets the RMS symbol magnitude error of the configured measurement channel. This value is expressed as a percentage.

Gets the RMS symbol phase error of the configured measurement channel. This value is expressed in degrees.

Gets the sum of the powers of all active code channels. If you set the CDA Power Unit method to dBm, the measurement returns the absolute measured power in dBm. Otherwise, the measurement returns the value relative to the total power in dB.

Gets the mean power of the received signal. This value is expressed in dBm.

Returns a string that represents the current object.