RFmxEvdoMXSlotPhaseResults Methods

Determines whether the specified Object is equal to the current Object.

Fetches the chip phase error trace linear fit trace for the SlotPhase measurement. The linear fit is obtained from the chip phase error on a half-slot basis. If a transient duration greater than zero is configured, the linear fit computation ignores the data of the transient duration on either side of the half-slot boundary and extrapolates the phase error to the half-slot boundaries.

Fetches the chip phase error trace for the SlotPhase Measurement. The chip phase error is the phase error between the actually received waveform and the reference waveform.

Fetches the maximum phase discontinuity observed at half-slot boundaries in the measurement interval.

Fetches the phase discontinuity value for the half-slot boundaries in the measurement interval.

Serves as a hash function for a particular type.

Gets the maximum slot phase discontinuity value observed in the measurement interval. This value is expressed in degrees.

Gets the Type of the current instance.

Returns a string that represents the current object.