RFmxEvdoMX.ConfigureFrequencyChannelNumber Method

public int ConfigureFrequencyChannelNumber(
	string selectorString,
	int linkDirection,
	int bandClass,
	int channelNumber
)

Public Function ConfigureFrequencyChannelNumber ( 
	selectorString As String,
	linkDirection As Integer,
	bandClass As Integer,
	channelNumber As Integer
) As Integer

Parameters

selectorString

Type: SystemString
Pass an empty string. The signal name that is passed when creating the signal configuration is used.

linkDirection

Type: SystemInt32
Specifies which direction the frequency is calculated. Currently, only uplink is supported.

bandClass

Type: SystemInt32
Specifies the band in which the channel is located as defined in Section: 1.5, Table 1.5-1: Band Class List, of the 3GPP2 C.S0057-F specification v1.0. Valid values range between 0 and 15, inclusive.

channelNumber

Type: SystemInt32
Is the absolute RF channel number. The valid range for this parameter depends on the value you specify for the band parameter.

Return Value

Reference