RFmxEVDO_AbortMeasurements
- Updated2024-10-14
- 1 minute(s) read
RFmxEVDO_AbortMeasurements
int32 __stdcall RFmxEVDO_AbortMeasurements (niRFmxInstrHandle instrumentHandle, char selectorString[]);
Purpose
Stops acquisition and measurements associated with the signal instance that you specify in the selectorString parameter. These measurements were previously initiated by the
RFmxEVDO_Initiate function or measurement read functions. Calling this function is optional, unless you want to stop a measurement before it is complete. This function executes even if there is an incoming error.
Parameters
| Input | ||
| Name | Type | Description |
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx driver obtains this parameter from the RFmxEVDO_Initialize function. |
| selectorString | char[] | Specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. Examples: "" "signal::sig1" You can use the RFmxEVDO_BuildSignalString function to build the selector string. |
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxEVDO_GetError function. The general meaning of the status code is as follows:
|
||||||||