SlotPower:Synchronization Mode Property
- Updated2023-10-12
- 1 minute(s) read
SlotPower:Synchronization Mode Property
Short Name: SlotPower Sync Mode
Property of RFmxCDMA2k
Specifies whether the measurement is performed from the frame or slot boundary.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Slot.
| Frame (0) |
The frame boundary is detected, and the measurement is performed over the number of slots specified by the SlotPower Meas Length property starting at the SlotPower measurement offset slots from the frame boundary. |
| Slot (1) |
The slot boundary is detected, and the measurement is performed over the number of slots specified by the SlotPower Meas Length property starting at the SlotPower measurement offset slots from the slot boundary. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxCDMA2k SlotPower Configure Synchronization Mode and Interval |
| Resettable | Yes |