RFmxCdma2kMXAcpConfiguration Methods

RFmxCdma2kMXAcpConfiguration Methods

The RFmxCdma2kMXAcpConfiguration type exposes the following members.

Methods

	Name	Description
	ConfigureAveraging	Configures averaging for the ACP measurement.
	ConfigureMeasurementMethod	Configures the method for performing the ACP measurement.
	ConfigureNoiseCompensationEnabled	Configures channel power compensation for the inherent noise floor of the signal analyzer.
	ConfigureNumberOfOffsets	Configures the number of offsets for the ACP measurement.
	ConfigureRbwFilter	Configures the RBW filter.
	ConfigureSweepTime	Configures the sweep time.
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object)
	GetAllTracesEnabled	Gets whether to enable the traces to be stored and retrieved after performing the ACP measurement.
	GetAveragingCount	Gets the number of acquisitions used for averaging when you set the SetAveragingEnabled(String, RFmxCdma2kMXAcpAveragingEnabled) method to True.
	GetAveragingEnabled	Gets whether to enable averaging for the ACP measurement.
	GetAveragingType	Gets the averaging type for averaging multiple spectrum acquisitions. The averaged spectrum is used for ACP measurement.
	GetCarrierIntegrationBandwidth	Gets the ACP carrier integration bandwidth. This value is expressed in Hz.
	GetFarIFOutputPowerOffset	Gets the offset by which to adjust the IF output power level for offset channels that are far from the carrier channel to improve the dynamic range. This value is expressed in dB. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange and set the SetIFOutputPowerOffsetAuto(String, RFmxCdma2kMXAcpIFOutputPowerOffsetAuto) method to False.
	GetFftOverlap	Gets the percentage of acquired samples to overlap while performing FFT.
	GetFftOverlapMode	Gets how the FFT overlap is applied to the acquired samples.
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object)
	GetIFOutputPowerOffsetAuto	Gets whether the measurement computes an IF output power level offset for the offset channels to improve the dynamic range of the ACP measurement. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange.
	GetMeasurementEnabled	Gets whether to enable the ACP measurement.
	GetMeasurementMethod	Gets the method for performing the ACP measurement.
	GetNearIFOutputPowerOffset	Gets the offset by which to adjust the IF output power level for offset channels that are near the carrier channel to improve the dynamic range. This value is expressed in dB. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange and set the SetIFOutputPowerOffsetAuto(String, RFmxCdma2kMXAcpIFOutputPowerOffsetAuto) method to False.
	GetNoiseCompensationEnabled	Gets whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer.
	GetNumberOfAnalysisThreads	Gets the maximum number of threads used for parallelism for the ACP measurement.
	GetNumberOfOffsets	Gets the number of offset channels.
	GetOffsetFrequency	Gets the frequency of an ACP offset channel relative to the carrier frequency. This value is expressed in Hz.
	GetOffsetIntegrationBandwidth	Gets the integration bandwidth of an ACP offset channel. This value is expressed in Hz.
	GetRbwFilterAutoBandwidth	Gets whether the measurement computes the RBW.
	GetRbwFilterBandwidth	Gets the bandwidth of the RBW filter used to sweep the acquired signal when you set the SetRbwFilterAutoBandwidth(String, RFmxCdma2kMXAcpRbwAutoBandwidth) method to False. This value is expressed in Hz.
	GetRbwFilterType	Gets the shape of the digital RBW filter.
	GetSequentialFftSize	Gets the FFT size, when you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to SequentialFft.
	GetSweepTimeAuto	Gets whether the measurement computes the sweep time.
	GetSweepTimeInterval	Gets the sweep time when you set the SetSweepTimeAuto(String, RFmxCdma2kMXAcpSweepTimeAuto) method to False. This value is expressed in seconds.
	GetType	Gets the Type of the current instance. (Inherited from Object)
	SetAllTracesEnabled	Sets whether to enable the traces to be stored and retrieved after performing the ACP measurement.
	SetAveragingCount	Sets the number of acquisitions used for averaging when you set the SetAveragingEnabled(String, RFmxCdma2kMXAcpAveragingEnabled) method to True.
	SetAveragingEnabled	Sets whether to enable averaging for the ACP measurement.
	SetAveragingType	Sets the averaging type for averaging multiple spectrum acquisitions. The averaged spectrum is used for ACP measurement.
	SetFarIFOutputPowerOffset	Sets the offset by which to adjust the IF output power level for offset channels that are far from the carrier channel to improve the dynamic range. This value is expressed in dB. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange and set the SetIFOutputPowerOffsetAuto(String, RFmxCdma2kMXAcpIFOutputPowerOffsetAuto) method to False.
	SetFftOverlapMode	Sets how the FFT overlap is applied to the acquired samples.
	SetIFOutputPowerOffsetAuto	Sets whether the measurement computes an IF output power level offset for the offset channels to improve the dynamic range of the ACP measurement. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange.
	SetMeasurementEnabled	Sets whether to enable the ACP measurement.
	SetMeasurementMethod	Sets the method for performing the ACP measurement.
	SetNearIFOutputPowerOffset	Sets the offset by which to adjust the IF output power level for offset channels that are near the carrier channel to improve the dynamic range. This value is expressed in dB. This method is used only if you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to DynamicRange and set the SetIFOutputPowerOffsetAuto(String, RFmxCdma2kMXAcpIFOutputPowerOffsetAuto) method to False.
	SetNoiseCompensationEnabled	Sets whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer.
	SetNumberOfAnalysisThreads	Sets the maximum number of threads used for parallelism for the ACP measurement.
	SetNumberOfOffsets	Sets the number of offset channels.
	SetRbwFilterAutoBandwidth	Sets whether the measurement computes the RBW.
	SetRbwFilterBandwidth	Sets the bandwidth of the RBW filter used to sweep the acquired signal when you set the SetRbwFilterAutoBandwidth(String, RFmxCdma2kMXAcpRbwAutoBandwidth) method to False. This value is expressed in Hz.
	SetRbwFilterType	Sets the shape of the digital RBW filter.
	SetSequentialFftSize	Sets the FFT size, when you set the SetMeasurementMethod(String, RFmxCdma2kMXAcpMeasurementMethod) method to SequentialFft.
	SetSweepTimeAuto	Sets whether the measurement computes the sweep time.
	SetSweepTimeInterval	Sets the sweep time when you set the SetSweepTimeAuto(String, RFmxCdma2kMXAcpSweepTimeAuto) method to False. This value is expressed in seconds.
	ToString	Returns a string that represents the current object. (Inherited from Object)

Top

See Also