RFmxCdma2kMX.GetTriggerMinimumQuietTimeDuration Method

public int GetTriggerMinimumQuietTimeDuration(
	string selectorString,
	out double value
)

Public Function GetTriggerMinimumQuietTimeDuration ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString  String

Pass an empty string. The signal name that is passed when creating the signal configuration is used.

value  Double

Upon return, contains the time duration for which the signal must be quiet before the signal analyzer arms the I/Q power edge trigger. This value is expressed in seconds. If you set the SetIQPowerEdgeTriggerSlope(String, RFmxCdma2kMXIQPowerEdgeTriggerSlope) method to Rising, the signal is quiet below the trigger level. If you set the IQ Power Edge Slope method to Falling, the signal is quiet above the trigger level.

Return Value

Reference