RFmxCdma2kMX.SetTriggerMinimumQuietTimeDuration Method

public int SetTriggerMinimumQuietTimeDuration(
	string selectorString,
	double value
)

Public Function SetTriggerMinimumQuietTimeDuration ( 
	selectorString As String,
	value As Double
) As Integer

Parameters

selectorString  String

Pass an empty string. The signal name that is passed when creating the signal configuration is used.

value  Double

Specifies the time duration for which the signal must be quiet before the signal analyzer arms the I/Q power edge trigger. This value is expressed in seconds. If you set the SetIQPowerEdgeTriggerSlope(String, RFmxCdma2kMXIQPowerEdgeTriggerSlope) method to Rising, the signal is quiet below the trigger level. If you set the IQ Power Edge Slope method to Falling, the signal is quiet above the trigger level.

Return Value

Reference