RFmxCdma2kMX.ConfigureFrequencyChannelNumber(String, Int32, Int32, Int32) Method

[ObsoleteAttribute("Use ConfigureFrequencyChannelNumber(string selectorString, RFmxCdma2kMXLinkDirection linkDirection, int bandclass, int channelNumber) instead.")]
public int ConfigureFrequencyChannelNumber(
	string selectorString,
	int linkDirection,
	int bandclass,
	int channelNumber
)

<ObsoleteAttribute("Use ConfigureFrequencyChannelNumber(string selectorString, RFmxCdma2kMXLinkDirection linkDirection, int bandclass, int channelNumber) instead.")>
Public Function ConfigureFrequencyChannelNumber ( 
	selectorString As String,
	linkDirection As Integer,
	bandclass As Integer,
	channelNumber As Integer
) As Integer

Parameters

selectorString  String

Pass an empty string. The signal name that is passed when creating the signal configuration is used.

linkDirection  Int32

Specifies the direction for which the frequency is calculated. Currently only uplink is supported.

bandclass  Int32

Specifies the band in which the channel is located as defined in Section: 1.5, Table 1.5-1: Band Class List, of the 3GPP2 C.S0057-F specification v1.0.

channelNumber  Int32

Specifies the channel number used to build the selector string.

Return Value

Reference