RFmxCdma2kMXAcpResults.FetchOffsetMeasurement Method

public int FetchOffsetMeasurement(
	string selectorString,
	double timeout,
	out double lowerRelativePower,
	out double upperRelativePower,
	out double lowerAbsolutePower,
	out double upperAbsolutePower
)

Public Function FetchOffsetMeasurement ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef lowerRelativePower As Double,
	<OutAttribute> ByRef upperRelativePower As Double,
	<OutAttribute> ByRef lowerAbsolutePower As Double,
	<OutAttribute> ByRef upperAbsolutePower As Double
) As Integer

Parameters

selectorString  String

Specifies a selector string comprising of the result name, and offset number. If you do not specify the result name, the default result instance is used.

timeout  Double

Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

lowerRelativePower  Double

Upon return, contains the lower offset channel power measured relative to the carrier absolute power. This value is expressed in dB.

upperRelativePower  Double

Upon return, contains the upper offset channel power measured relative to the carrier absolute power. This value is expressed in dB.

lowerAbsolutePower  Double

Upon return, contains the lower offset channel absolute power.

upperAbsolutePower  Double

Upon return, contains the upper offset channel absolute power.

Return Value

Reference