Installing Bus Connectors

What to Use

  • Bus connector
  • DIN rail

What to Do

Complete the following steps to install bus connectors on the DIN rail.


1378

  1. Insert the bus connector for the REM-11154 into the DIN rail.
    Caution Verify that you are using the correct bus connector for the module width.
  2. Slide the bus connector along the DIN rail until it connects to the preceding bus connector.
    Note A bus connector will not attach to a preceding bus connector with a mounted module. Remove the preceding module before installing additional bus connectors.
  3. Repeat Steps 2 and 3 for additional bus connectors.