What You Need to Get Started
- Updated2024-09-03
- 2 minute(s) read
Kit Contents
Verify that the following items are included in the PXIe-7890/7891 kit.
-
PXIe-7890 or PXIe-7891
module.
- PXIe-7890 or PXIe-7891 Safety, Environmental, and Regulatory Information document.
Recommended Cables
NI recommends the following cables for use with the PXIe-7890/7891.
| Connector | Cable | Description | Part Number |
|---|---|---|---|
|
CONNECTOR 0 and CONNECTOR 4 |
SHC68-C68-D4 |
68-Pin, Male VHDCI to 68-Pin, Male VHDCI, 50 Ω, Shielded Digital Cable |
781013-01 (0.55 m) 196275-01 (1 m) 781293-01 (2 m) |
|
SHC68-2MDR26- RDIO2[1] |
R Series Digital Cable, 1 m |
148709-01 (1 m) |
|
|
SHC68-C68- RDIO2[2] |
68-PinVHDCI Male to 68-Pin VHDCI Male, 80 MHz, Shielded Digital Cable |
156166-01 (1 m) 156166-02 (2 m) |
|
|
CONNECTOR 1 and CONNECTOR 3 |
SHC68-C68-D4[3] |
68-Pin, Male VHDCI to 68-Pin, Male VHDCI, 50 Ω, Shielded Digital Cable |
781013-01 (0.55 m) 196275-01 (1 m) 781293-01 (2 m) 132625-03 (3 m) |
|
SHC68- 2MDR26-RDIO2[1] |
R Series Digital Cable, 1 m |
148709-01 (1 m) |
|
|
SHC68-C68- RDIO2[2] |
68-Pin VHDCI Male to 68-Pin VHDCI Male, 80 MHz, Shielded Digital Cable |
156166-01 (1 m) 156166-02 (2 m) |
|
|
CONNECTOR 2 |
SHC68-C68-D3 |
68-Pin, male VHDCI to 68-Pin, male VHDCI, 100 ohm, double- shielded LVDS cable |
188143-01 (1 m) |
|
[1] To be used together with a Read Transition Interface (RTI-12307) in a Switch Load and Signal Conditioning (SLSC) system. [2] To be used together with a Read Transition Interface (RTI-12301) in an SLSC system. [3] Used for Connector 3 when the load side is terminated with 50 Ω. |
|||
Recommended Accessories
NI recommends the following accessories for use with the PXIe-7890/7891.
| Connector | Accessory | Description | Part Number |
|---|---|---|---|
|
CONNECTOR 0 and CONNECTOR 4 |
SCB-68 HSDIO |
Screw Terminal, 68-pin VHDCI, Shielded I/O Connector Block |
782914-01 |
|
CONNECTOR 1 and CONNECTOR 3 |
SMB-2153 |
32-Channel, 1-Pin SMB, 68-Pin VHDCI, Breakout Connector Block |
782648-01 |
|
SCB-68 HSDIO |
Screw Terminal, 68-pin VHDCI, Shielded I/O Connector Block |
782914-01 |
|
|
CONNECTOR 2 |
SMB-2145[1] |
1-Pin SMB, 68-pin VHDCI, 16-Channel Analog Input, NI-5752 Terminal Block |
781516-01 |
| [1] The negative analog input will be connected to the common ground GND of the module. | |||