Use NI-RFSG to configure the parameters of the RF signal you want to generate.

Complete the following steps to configure the center frequency, output power level, generation mode, and, for arbitrary waveforms, the signal bandwidth.

  1. Required: Use Configure RF to define the center frequency and power level of the RF signal to generate.
    Note All NI-RFSG programs must include at least Configure RF.
  2. Use Configure Generation Mode to define the type of signal to generate: CW, an arbitrary waveform, or a waveform dictated by scripts you create.
  3. If generating an arbitrary waveform, with or without scripting, use Configure Signal Bandwidth to define the bandwidth for the signal.
  4. If generating an arbitrary waveform, with or without scripting, use Write Arb Waveform to construct the waveform to generate.
  5. If using scripting to generate an arbitrary waveform, use Write Script to incorporate your script into the program.