mmRH-5582 Front Panel, Back Panel, and LEDs

Front Panel

Figure 6. mmRH-5582 with Direct TRX Ports Only

1378

Figure 7. mmRH-5582 with Switched and Direct TRX Ports

1378

Figure 8. mmRH-5582 with Switched TRX Ports Only

1378

Table 9. Connector Descriptions
Connector Description Connector Type
DIRECT TRX PORTS (0,1, or 8 on modules labeled with DIRECT TRX PORTS only)

Bi-directional connector for both input and output of RF signals.

2.4 mm (f), 50 Ω
SWITCHED TRX PORTS (0 through 7 or 0 through 15 on modules labeled with SWITCHED TRX PORTS only)

Bi-directional connector for both input and output of RF signals.

2.4 mm (f), 50 Ω

Back Panel


1378

Table 10. Connector Descriptions
Connector Description Connector Type
IF OUT IF output connector that routes receive signals to IF IN mmWave 0 or 1 connector on the PXIe-3623. SMA 27 GHz (f)
LO IN Local oscillator input connector. SMA 27 GHz (f)
IF IN IF input connector that receives signals from the IF OUT mmWave 0 or 1 connector on the PXIe-3623. SMA 27 GHz (f)
Power Power supply input. MINI-COMBICON
DIO IN Digital input/output control. Mini HDMI
DIO OUT Digital input/output control for daisy chaining to adjacent mmWave radio heads. Mini HDMI
Table 11. LED Indicators
LED Indications
ACCESS

Indicates the basic hardware status of the module.

  • OFF—The module is not yet functional, or the module has detected a problem with a power rail.
  • AMBER—The module is being accessed. Accessed means that the device setup registers are being read from or written to in order to control the device.
  • GREEN—The module is ready to be programmed by software.
    • ACTIVE

    Indicates the state of the module.

  • OFF—The module is not powered.
  • AMBER—The module is being configured.
  • GREEN—The module is ready for configuration.
  • RED—The module has encountered a hardware setup error or the module is exceeding approved operating temperature and is in a state of thermal shutdown.