Use the socketed CLIP interface to communicate directly with the onboard SRAM. Socketed CLIP lists all memory interfaces that are compatible with the SRAM. The SRAM CLIP is present in the LabVIEW project by default but is disabled.

Complete the following steps to configure SRAM with socketed CLIP:
  1. Right-click the SRAM CLIP and select Properties from the shortcut menu to display the SRAM Properties dialog box.
  2. Select Enable Memory if it is not already selected to display the SRAM configuration options.
  3. Select the appropriate clock for your project in the Clock Selections dialog box.

    You can use the SRAM CLIP in any single clock domain. You can select only clocks already added to the project.