PXIe-5633 Front Panel and LEDs

Figure 2. PXIe-5633 Front Panel


Table 4. PXIe-5633 Connector Descriptions
Connector Connector Type Description
PORT 1 3.5 mm (f) Port 1 for VNA measurements; input/output terminal for RF signals for VST measurements when integrated with VST
SWITCH IN 3.5 mm (f) Intermodule connection only (when integrated with VST)
IF OUT 3.5 mm (f) Reserved
SWITCH OUT 3.5 mm (f) Intermodule connection only (when integrated with VST)
IF IN 3.5 mm (f) Reserved
PORT 2 3.5 mm (f) Port 2 for VNA measurements; input/output terminal for RF signals for VST measurements when integrated with VST
LO IN MMPX (f) Reserved
LO OUT MMPX (f) Reserved
REF IN MMPX (f) Reserved
REF OUT MMPX (f) Reserved
PFI 0 MMPX (f) Reserved
PFI 1 MMPX (f) Reserved
Table 5. PXIe-5633 LED Indicators
LED Indications
ACC

Access: Indicates the basic hardware status of the module.

  • Off—The module is not yet functional or has detected a problem with a PXI Express power rail
  • Amber—The module is being accessed; accessed means that you are writing to the module setup registers to control the module, reading from the module to monitor its status, or transferring data to or from the module
  • Green—The module is controllable through the software
    • ACTIVE

    Indicates the state of the module.

  • Off—The module is idle
  • Dim amber—The module is armed and waiting for an acquisition trigger
  • Solid green—The module has received an acquisition trigger and is making a measurement
  • Solid red—The module has detected an error; the LED remains red until the error condition is removed

    Error conditions include loss of PLL lock and thermal shutdown.

    • Note Indicators are listed in increasing order of priority.