PXIe-5632 Front Panel

The PXIe-5632 contains nine connectors and two LEDs.

Figure 1. PXIe-5632 Front Panel

1378

Table 2. Device Front Panel Icon Definitions
1378 Refer to the user documentation for required maintenance measures to ensure user safety and/or preserve the specified EMC performance.
1378 The signal pins of this product's input/output ports can be damaged if subjected to ESD. To prevent damage, turn off power to the product before connecting cables and employ industry-standard ESD prevention measures during installation, maintenance, and operation.
Table 3. PXIe-5632 Front Panel Connectors
Connector Use
PORT 1 Input/output terminal for PXIe-5632 measurements.
SOURCE 1 IN Input terminal for the source 1 access loop.
SOURCE 2 IN Input terminal for the source 2 access loop.
REF IN Input terminal for an external reference signal for the PXIe-5632.
PFI 0 Input terminal for an external trigger signal.
LO OUT Output terminal for the PXIe-5632 local oscillator.
SOURCE 1 OUT Output terminal for the source 1 access loop.
SOURCE 2 OUT Output terminal for the source 2 access loop.
PORT 2 Input terminal for PXIe-5632 measurements.
Table 4. PXIe-5632 LEDs
LED Indication
ACCESS

Indicates the basic hardware status of the PXIe-5632.

OFF—The device is not yet functional.

AMBER—The device is being accessed. Accessed means that the device is being communicated with over the PXI Express bus.

GREEN—The device is ready to be programmed by NI-VNA.

RED—The device has detected a hardware error, such as a hardware failure. The LED remains red until the error condition is removed.

ACTIVE

Indicates the state of the PXIe-5632.

OFF—The device is not yet functional.

AMBER—The device is armed and waiting for a trigger.

GREEN—The device has received a Start Trigger. This state also indicates that the device is making a measurement.

RED—The device has detected a spurious error, such as when the PLL becomes unlocked. The LED remains red until the error condition is removed.