You can verify proper installation and configuration of your device by making a measurement using the instrument design libraries within a LabVIEW sample project.

This measurement requires installation of the instrument design libraries.
  1. Launch LabVIEW.
  2. Select File » Create Project.
  3. On the left side of the Create Project window, select IF Digitizer.
  4. On the right side of the Create Project window, select the Multirecord Acquisition sample project and click Next.
  5. Specify a name and location for the project in the Create Project window and click Finish.
    LabVIEW creates, configures, and opens a new Multirecord Acquisition project.
    Note This step may take several minutes.
  6. In the project tree, navigate to My Computer » Project Documentation, open Multirecord Acquisition.html, and navigate to the Running this Sample Project section of the documentation.
  7. Follow the instructions in the project documentation for making the measurement.