Accessory Specifications

These specifications apply to the ACC-416x-0 accessory for use with the PXIe-4162/PXIe-4163 SMU.

  • The PXIe-4162 is a 12-Channel, ±24 V, 100 mA SMU
  • The PXIe-4163 is a 24-Channel, ±24 V, 50 mA SMU
For complete device specifications, refer to the PXIe-4162/PXIe-4163 specifications available at ni.com/manuals.

Definitions

Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical specifications describe the performance met by a majority of models.
  • Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.

Specifications are Nominal unless otherwise noted.

Derating

Remote Sense

Maximum sense lead resistance

100 Ω

Maximum force lead drop

1 V

Voltage accuracy

Add 200 μV to the accuracy specification for your respective module when using the ACC-416x-0 accessory.

Load Regulation

Voltage

Add 300 μV/mA to the accuracy specification for your respective module at the output connector pins of the connected ACC-416x-0 accessory when using local sense configuration.

Physical

Dimensions

75 mm x 81 mm x 19 mm

(3.0 in. x 3.2 in. x 0.7 in.)

Weight

89 g (3.15 oz)

Environmental Guidelines

Notice This model is intended for use in indoor applications only.

Environmental Characteristics

Temperature and Humidity
Temperature
Operating

Chassis with slot cooling capacity ≥58 W[1]1 Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.

0 °C to 55 °C

All other compatible chassis

0 °C to 40 °C

Storage

-40 °C to 71 °C

Humidity

Operating

10% to 90%, noncondensing

Storage

5% to 95%, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m (800 mbar) (at 25 °C ambient temperature)

Compliance and Standards

Environmental Management

NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers.

For additional environmental information, refer to the Engineering a Healthy Planet web page at ni.com/environment. This page contains the environmental regulations and directives with which NI complies, as well as other environmental information not included in this document.

EU and UK Customers

  • 1378 Waste Electrical and Electronic Equipment (WEEE)—At the end of the product life cycle, all NI products must be disposed of according to local laws and regulations. For more information about how to recycle NI products in your region, visit ni.com/environment/weee.
  • 电子信息产品污染控制管理办法(中国RoHS)

  • 1378 中国RoHSNI符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。关于NI中国RoHS合规性信息,请登录 ni.com/environment/rohs_china。(For information about China RoHS compliance, go to ni.com/environment/rohs_china.)
  • CE Compliance 1378

    This product meets the essential requirements of applicable European Directives, as follows:

    • 2011/65/EU; Restriction of Hazardous Substances (RoHS)

    Export Compliance

    This product is subject to control under the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) administered by the U.S. Department of Commerce's Bureau of Industry and Security (BIS) (www.bis.doc.gov) and other applicable U.S. export control laws and sanctions regulations. This product may also be subject to additional license requirements of other countries' regulations.

    Additionally, this product may also require export licensing before being returned to NI. The issuance of a Return Material Authorization (RMA) by NI does not constitute export authorization. The user must comply with all applicable export laws prior to exporting or re-exporting this product. See ni.com/legal/export-compliance for more information and to request relevant import classification codes (e.g. HTS), export classification codes (e.g. ECCN), and other import/export data.

    Product Certifications and Declarations

    Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/product-certifications, search by model number, and click the appropriate link.

    1 Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.