PCIe-8364 DIP Switch
- Updated2025-03-19
- 1 minute(s) read
PCIe-8364 DIP Switch
The PCIe-8364 has a DIP switch with four switches, located on the top-left corner of the board as shown in the PCIe-8364 block diagram. Refer to the PCIe-8364 Block Diagram to view the location of the DIP switch.
- BIOS Switch
- NC = No connect
- NC = No connect
- NC = No connect
PCIe-8364 BIOS Switch
The BIOS switch (DIP switch 1) enables the BIOS compatibility feature. The BIOS switch is disabled by default.
Enabling BIOS compatibility requires the installation of MXI-Express BIOS Compatibility software on the host PC. Refer to the Compatibility with Host PCs section linked below for more information on BIOS compatibility.
| Position | Function |
|---|---|
| Left (default) | Disabled (show downstream devices) |
| Right | Enabled (hide downstream devices) |
Related Information
- PCIe-8364 Block Diagram
Block diagrams describe the hardware architecture of your instrument and the paths that signals take through components of the instrument.
- PCIe-8364 Compatibility with Host PCs
The BIOS of some host PCs might not support the essential MXI-Express functionality. NI provides a combination of supplemental software and onboard PCIe-8364 features to address this issue.