RfsgArb.WriteWaveform(String, ComplexInt16[]) Method
- Updated2025-05-22
- 1 minute(s) read
Rfsg
Writes an arbitrary waveform to the NI-RFSG, starting from the position of the last data written in the onboard memory.
Namespace: NationalInstruments.ModularInstruments.NIRfsg
Assembly: NationalInstruments.ModularInstruments.NIRfsg.Fx45 (in NationalInstruments.ModularInstruments.NIRfsg.Fx45.dll) Version: 2025
Syntax
public void WriteWaveform( string name, ComplexInt16[] data )
Public Sub WriteWaveform ( name As String, data As ComplexInt16() )
Parameters
- name String
- Specifies the name used to identify the waveform. This string is case-insensitive and alphanumeric, and it does not use reserved words.
- data ComplexInt16
- Specifies the array of data to load onto the waveform. The data array passed to this method should be of type NationalInstruments.ComplexInt16.
Exceptions
| Exception | Condition |
|---|---|
| ObjectDisposedException | The WriteWaveform(String, Double, Double) method was accessed after the associated NIRfsg object was disposed. |
Remarks
This method takes the data array of a complex baseband signals data as input. If the waveform is large, use the
AllocateWaveform(String, Int32) method.
The NI-RFSG must be in the Configuration state before you call WriteWaveform(String, Double, Double).