RfsaSignalPath Properties

RfsaSignalPath Properties

The RfsaSignalPath type exposes the following members.

Properties

	Name	Description
	Advanced	Gets the Advanced sub-object providing access to advance features related to RfsaSignalPath.
	AvailablePorts	Gets a comma-separated list of the ports available for use based on your instrument configuration.
	DigitalIFEqualizationEnabled	Gets or sets whether to enable or disable digital equalization filter for the RF downconverter.
	DigitizerDitherEnabled	Gets or sets whether dithering is enabled on the digitizer.
	DigitizerVerticalRange	Gets or sets the vertical range of the digitizer.
	EnableFractionalResampling	Gets or sets whether fractional resampling is enabled on the digitizer.
	IFFilterBandwidth	Gets or sets the IF Filter Bandwidth of the device.
	LO2ExportEnabled	Obsolete. Gets or sets whether to enable the LO2 OUT terminal on the installed devices.
	LocalOscillator	Gets the LocalOscillator sub-object used to configure LO properties. An active channel can be passed using the indexer ItemString.
	LOExportEnabled	Obsolete. Gets or sets whether to enable the LO OUT terminals on the NI 5603 RF downconverter.
	LOFrequency	Obsolete. Gets or sets the LO signal frequency for the configured center frequency.
	LOOutExportConfigureFromRfsg	Obsolete. Gets or sets whether to allow NI-RFSG to control the NI-RFSA LO out export.
	LOSource	Obsolete. Gets or sets the LO Source for the device.
	NI5663	Gets the signal path features related specifically to the NI 5663.
	NI5665	Gets the NI5665 sub-object containing signal path related features specific to NI5665.
	NI5694	Gets the NI5694 sub-object containing signal path related features specific to NI5694.
	RFOutLOExportEnabled	Obsolete. Gets or sets whether to enable the RF OUT LO OUT terminal on the PXIe-5840.
	SelectedPorts	Gets or sets which port to configure to acquire a signal.

Top

See Also