RfsaWarning Properties

RfsaWarning Properties

The RfsaWarning type exposes the following members.

Properties

	Name	Description
	AttenuationConstraintsNotCalibratedWarningCode	Gets the warning code for uncalibrated attenuation constraints.
	CacheNotSufficientToStoreAcquiredWaveformWarningCode	Gets the warning code when the cache is not sufficient to store the acquired waveform within the driver.
	CalibrationDataMissingOrInvalidWarningCode	Gets the warning code for invalid or missing calibration data.
	CalibrationIFEqualizationDataNotPresentWarningCode	Gets the warning code when calibration IF equalization data is not present.
	CenterFrequencyOutsideSpecificationWarningCode	Gets the warning code when center frequency is outside specification.
	Code	Gets or sets the GUID code assigned to the warning.
	CurrentChannelCouplingConfigurationNotCalibratedWarningCode	Gets the warning code when current channel coupling configuration is not calibrated.
	DigitizerPllWarningCode	Gets the warning code for digitizer PLL warning.
	DigitizerWarningCode	Gets the warning code for digitizer.
	DspOverflowWarningCode	Gets the warning code when DSP overflow is detected.
	ErrorQueryNotSupportedWarningCode	Gets the warning code when Error Query is not supported.
	ExternalCalibrationConstantsInvalidWarningCode	Gets the warning code when external calibration constants are invalid.
	ExternalCalibrationDataFormatInvalidWarningCode	Gets the warning code when the hardware external calibration data format is older than the earliest revision supported by the currently installed driver.
	ExternalCalibrationDataTooNewForSoftwareWarningCode	Gets the warning code when external calibration data is new for software.
	FrequencyContentOutsideSpecificationWarningCode	Gets the warning code when frequency content is outside specification.
	IFConditioningDeviceWarningCode	Gets the warning code when the IF Conditioning device returned a warning.
	IFOverloadProtectionNeedToBeCalibratedWarningCode	Gets the warning code when IF Overload protection need to be calibrated.
	IFStateNotPresentWarningCode	Gets the warning code for missing IF state.
	LOWarningCode	Gets the warning code for LO warning.
	Message	Gets the message related to the warning.
	ReferenceClockPllNotLockedWarningCode	Gets the warning code when reference clock PLL is not locked.
	RFConditioningDeviceWarningCode	Gets the warning code when the RF Conditioning device returned a warning.
	RFConfigurationNotValidWarningCode	Gets the warning code for invalid RF configuration.
	SelfCalibrationOffsetOutOfBoundsWarningCode	Gets the warning code when the self calibration offset measured by NI-RFSA was out of bounds.
	TemperatureDeviationLimitExceededWarningCode	Gets the warning code when temperature deviation limit is exceeded.
	UnexpectedDriverWarningCode	Gets the warning code for an unexpected driver warning.

Top

See Also