RfsaIQAcquisition.FetchIQSingleRecordComplex<T>(Int64, Int64, PrecisionTimeSpan) Method
- Updated2025-05-22
- 1 minute(s) read
Rfsa
Fetches I/Q data from a single record in an acquisition.
Namespace: NationalInstruments.ModularInstruments.NIRfsa
Assembly: NationalInstruments.ModularInstruments.NIRfsa.Fx45 (in NationalInstruments.ModularInstruments.NIRfsa.Fx45.dll) Version: 2025
Syntax
public T[] FetchIQSingleRecordComplex<T>( long recordNumber, long numberOfSamples, PrecisionTimeSpan timeout )
Public Function FetchIQSingleRecordComplex(Of T) ( recordNumber As Long, numberOfSamples As Long, timeout As PrecisionTimeSpan ) As T()
Parameters
- recordNumber Int64
- Specifies the record to retrieve. Record numbers are zero-based.
- numberOfSamples Int64
- Specifies the number of samples to fetch.
- timeout PrecisionTimeSpan
- Specifies the time, in seconds, allotted for the method to complete before returning a timeout error. A value of MaxValue specifies the method waits until all data is available. A value of 0 specifies the method immediately returns available data.
Type Parameters
- T
- The type of the underlying data.
Supported Type: NationalInstruments.ComplexDouble and NationalInstruments.ComplexInt16
Return Value
TReturns the acquired waveform.
Exceptions
| Exception | Condition |
|---|---|
| ObjectDisposedException | The FetchIQSingleRecordComplexT(Int64, Int64, PrecisionTimeSpan, RfsaWaveformInfo) method was accessed after the associated NIRfsa object was disposed. |
Remarks
The fetch transfers acquired waveform
data from device memory to computer memory. The data was acquired to onboard memory previously by
the hardware after the acquisition was initiated. This method is not necessary if you use the
ReadIQSingleRecordComplex(PrecisionTimeSpan, RfsaWaveformInfo),
ReadIQSingleRecordComplexWaveform(PrecisionTimeSpan, RfsaWaveformInfo),
MemoryOptimizedReadIQSingleRecordComplex(PrecisionTimeSpan, ComplexDouble, RfsaWaveformInfo), or
MemoryOptimizedReadIQSingleRecordComplexWaveform(PrecisionTimeSpan, ComplexWaveformComplexDouble, RfsaWaveformInfo) methods,
as the fetch is performed as part of these methods.