RfsaLOSource Properties
- Updated2025-07-17
- 2 minute(s) read
Rfsa
The RfsaLOSource type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | LOIn | Gets a value which indicates that the LO source used to downconvert the RF input signal is connected to the REF/LO in connector on the NI 5694 front panel. |
| None | Gets a value which indicates no LO source is required to downconvert the RF input signal. |
| Onboard | Gets a value which indicates that the onboard synthesizer is used to generate the LO signal that downconverts the RF input signal. |
| Secondary | Gets a value which indicates the LO source used to downconvert the RF input signal is the secondary LO. |
| SGSAShared | Uses the same internal LO during NI-RFSA and NI-RFSG sessions. NI-RFSA selects an internal synthesizer and the synthesizer signal is switched to both the RX and TX mixers.This value is valid on only the PXIe-5830/5831/5832. |