RfsaAdvancedAcquisition Properties

RfsaAdvancedAcquisition Properties

The RfsaAdvancedAcquisition type exposes the following members.

Properties

	Name	Description
	AllowOutOfSpecificationUserSettingsEnabled	Gets or sets whether to enable or disable warnings and errors when you set frequency and power values beyond the limits of the NI-RFSA device specifications. When you set this property to Enabled, the driver does not report out-of-specification warnings and errors.
	DataTransferBlockSize	Gets or sets the maximum number of samples to transfer at a time from the device to host memory.
	DataTransferMaximumBandwidth	Gets or sets the maximum bandwidth that the NI-RFSA can consume.
	DecimationDelay	Gets or sets the sub-sample delay to apply to the acquired signal.
	DeviceInstantaneousBandwidth	Gets or sets the instantaneous bandwidth of the device, in hertz (Hz).
	DownconverterCenterFrequency	Gets or sets in-band retuning and specifies the current frequency, in hertz (Hz), of the RF downconverter.
	DownconverterFrequencyOffset	Gets or sets the I/Q carrier frequency offset of the downconverter.
	DownconverterFrequencyOffsetMode	Gets or sets whether to allow NI-RFSA to select the downconverter frequency offset. You can either set an offset yourself or let NI-RFSA set one for you.
	IFOutputFrequency	Gets the center frequency of the IF output that corresponds to the configured RF center frequency.

Top

See Also