Device Specific:Vector Signal Transceiver:Signal Path:Input Port
- Updated2025-10-14
- 1 minute(s) read
Specifies the connector(s) to use to acquire the signal. To set this property, the NI-RFSA device must be in the Configuration state.
Default Values:
PXIe-5820: IQ In
All other devices: RF In
Supported Devices: PXIe-5644/5645/5646, PXIe-5820/5830/5831/5832/5840/5841/5842/5860
Remarks
The following table lists the characteristics of this property.
| Short Name | Input Port |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | Yes |
| RF In | 2000 | Enables the RF IN port. |
| IQ In | 2001 | Enables the I/Q IN port. |
| Cal In | 2002 | Enables the CAL IN port. |
| I Only | 2003 | Enables the I terminals of the I/Q IN port. Note I Only is supported only for PXIe-5645.
|