Specifies the IF response settings.

Supported Devices: PXIe-5601


icon

Inputs/Outputs

  • ci32.png IF filter —

    IF filter specifies the IF filter used by the downconverter.

    187.5 MHz Wide (1400)

    Uses the 187.5 MHz wide bandwidth path.
    187.5 MHz Narrow (1401)

    Uses the 187.5 MHz narrow bandwidth path.
    53 MHz (1402)

    Uses the 53 MHz path.
    Bypass (1403)

    Bypasses the IF path.
  • civrn.png instrument handle —

    instrument handle identifies your calibration instrument session. instrument handle is obtained from the niRFSA Init Ext Cal VI.

  • cdbl.png RF frequency —

    RF frequency specifies the RF frequency, in Hz, used during the IF response adjustment.

  • cdbl.png bandwidth —

    bandwidth specifies the bandwidth, in Hz, to use for the IF response adjustment.

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • c1ddbl.png measurements —

    measurements specifies the relevant measurements for each IF filter configuration, in dB.

  • iivrn.png instrument handle out —

    instrument handle out passes a reference to your instrument session to the next VI. instrument handle is obtained from the niRFSA Initialize VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.