Specifies the IF attenuation settings.

Supported Devices: PXIe-5601


icon

Inputs/Outputs

  • ci32.png IF filter —

    IF filter specifies the IF filter used by the downconverter.

    187.5 MHz Wide (1400)

    Uses the 187.5 MHz wide bandwidth path.
    187.5 MHz Narrow (1401)

    Uses the 187.5 MHz narrow bandwidth path.
    53 MHz (1402)

    Uses the 53 MHz path.
    Bypass (1403)

    Bypasses the IF path.
  • civrn.png instrument handle —

    instrument handle identifies your calibration instrument session. instrument handle is obtained from the niRFSA Init Ext Cal VI.

  • c1ddbl.png attenuator settings —

    attenuator settings specifies the IF attenuator settings for the measurement. The first element in the array corresponds with IF1, the next element corresponds to IF2, and so on.

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • cdbl.png measurement —

    measurement specifies the relevant measurement taken for the current configuration.

  • iivrn.png instrument handle out —

    instrument handle out passes a reference to your instrument session to the next VI. instrument handle is obtained from the niRFSA Initialize VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.