Multi-segment Measurement Mode Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Multi-segment Measurement Mode
Property of niWLANAnalysis
Specifies whether to use a single analyzer or two analyzers for each channel of a multi-segment (80+80) MHz 802.11ac, 802.11ax signal for spectral measurements. This property is applicable when you set the Number of Segments property to 2 and the channel bandwidth is 80 MHz. When you set this property to Single Analyzer, you must specify the value of the Carrier Frequency for both the segments.
The default value is Multiple Analyzers.
| Single Analyzer (0) |
Specifies that one vector signal analyzer is used to perform the spectral measurement on each channel of the (80+80) MHz 802.11ac, 802.11ax signal. |
| Multiple Analyzers (1) |
Specifies that two vector signal analyzers are used to perform the spectral measurement on each channel of the (80+80) MHz 802.11ac, 802.11ax signal. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | No |