Packet:OFDM:Scrambler Seed Property
- Updated2023-02-21
- 2 minute(s) read
Short Name: Scrambler Seed
Property of niWLANAnalysis
Specifies the scrambler seed for combined signal demodulation. To reduce the test time, you must set the scrambler seed while generating a signal from the device under test (DUT).
The following table lists the valid values you must use for this property:
| Scrambler Seed setting on DUT | Valid Value for the Scrambler Seed property | Comments | |
|---|---|---|---|
| During the Creation of the Reference Files | During OFDM Demod Measurement | ||
| S | S | S or -1 | DUT scrambler seed is fixed for all WLAN packets to a particular value during both creation of reference files, and the OFDM Demod measurement. |
| S i | S i | -1 | DUT scrambler seed changes from packet to packet. Scrambler seed for the received packet is estimated while performing the OFDM Demod measurement. |
| S i | S | S | DUT scrambler seed changes from packet to packet during the creation of reference files. However, during the OFMD demod measurement, DUT scrambler seed is kept fixed. |
where S is the fixed seed value, and S i is the varying seed value.
 |
Note The measurement time is the lowest when the scrambler seed value is a fixed value during OFDM Demod measurement. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | No |