OFDM Demod:Results:Header:TVHT Mode Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: OFDM TVHT Mode
Property of niWLANAnalysis
Returns the format of the received signal. This property is valid only if you set the Standard property to 80211AF MIMOOFDM.
| TVHT_MODE_1 (0) |
Indicates that the received signal is in the TVHT_MODE_1 format, representing a single basic channel unit (BCU). |
| TVHT_MODE_2C (1) |
Indicates that the received signal is in the TVHT_MODE_2C format, representing two contiguous BCUs. |
| TVHT_MODE_2N (2) |
Indicates that the received signal is in the TVHT_MODE_2N format, representing two noncontiguous BCUs. |
| TVHT_MODE_4C (3) |
Indicates that the received signal is in the TVHT_MODE_4C format, representing four contiguous BCUs. |
| TVHT_MODE_4N (4) |
Indicates that the received signal is of the TVHT_MODE_4N format, representing two noncontiguous frequency segments. Each frequency segment is composed of two BCUs. |
| Not Applicable (-3) |
Indicates that the result is invalid for the current configuration. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read Only |
| High-level VIs | N/A |
| Resettable | No |