OFDM Demod:Results:Channel Matrix Power:Cross Power:Maximum (dB) Property
- Updated2023-02-21
- 2 minute(s) read
Short Name: OFDM Cross Power Maximum (dB)
Property of niWLANAnalysis
Returns the maximum across iterations of cross power measurements. The cross power for channelx is the contribution of the power from streams other than streamx in channelx. To get the individual contributions of each stream, use the format channelx/streamy for the active channel, where x is not equal to y. This value is expressed in dB.
You must use the following active channel string formats to query this property.
| Standard Property Value | Active Channel String Syntax |
|---|---|
| 80211N MIMOOFDM | "channelx" |
| "channelx/streamy" | |
| 80211AC MIMOOFDM, 80211AF MIMOOFDM, 80211AX MIMOOFDM | "[segmentx/]channely" ("segment0/" is optional if the Number of Segments property is set to 1) |
| "[segmentx/]channely/streamz" ("segment0/" is optional if the Number of Segments property is set to 1) | |
| 80211AH MIMOOFDM | "channelx" |
| "channelx/streamy" |
 |
Note The result of the OFDM Cross Power Maximum property is invalid if you set the OFDM Combined Signal Demodulation Enabled property to True. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read Only |
| High-level VIs | N/A |
| Resettable | No |