Sync Pulse Clock Source
- Updated2025-10-07
- 1 minute(s) read
| Short Name: | SyncPulseClkSrc |
| Description: | Specifies the source for the 10 MHz clock signal used as the Sync Pulse Clock. If you want to control this yourself when synchronizing PCI devices, then drive a 10 MHz clock onto RTSI 7 and set this property accordingly. |
| Values | |
| PXI Devices: | "PXI_CLK10", "None" |
| PCI Devices: | "RTSI_7", "None" |
| Default Value: | "None". "None" directs the niTClk Synchronize VI to create the necessary routes. For PCI, one of the synchronized devices drives a 10 MHz clock on RTSI 7, unless RTSI 7 is already being driven. |
Remarks
The following table lists the characteristics of this property.
| Short Name | SyncPulseClkSrc |
| Data type |  |
| Permissions | Read/Write |
| Corresponding Active Channels | N/A |