NI 2814 2-Wire 8×9 Matrix Topology
- Updated2025-01-20
- 1 minute(s) read
The following figure represents the NI 2814A/B (NI 2814) in the 2-Wire 8×9 Matrix Topology.
Making a Connection
The immediate operation, niSwitch Connect Channels VI or the niSwitch_Connect function with parameters card1r2 and c1, results in the following connection:
signal connected to CARD1R2W0 is routed to C1W0
signal connected to CARD1R2W1 is routed to C1W1
Pinout
The following figure identifies the pins for the NI 2814.
Note Dual connections separated by a slash in the format of
TYPE A SIGNAL(A)/TYPE B
SIGNAL(B) indicate pins that connect to a different signal
depending on the card type. For example, a pin labeled
AB0(A)/NO CONNECT(B) would connect to AB0 on a type A
card, and would make no connection on a type B card.