Waveform Measurement:Reference Levels:Percentage Units Method Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Percentage Method
Property of niScope
Specifies the method used to map percentage reference units to voltages. The default value is BaseTop.
LowHigh (0) |
Specifies that the reference level percentages should be computed using the low/high method, |
MinMax (1) |
Reference level percentages are computed using the min/max method. |
BaseTop (2) |
Reference level percentages are computed using the base/top method. |
Remarks
The following table lists the characteristics of this property.
Datatype | ![]() |
Permissions | Read/Write |
High-level VIs | N/A |
Channel-based | Yes |
Resettable | No |